notebook and battery drive is a very precious component, coupled with the high frequency of use, life is indeed Laptop Battery very limited. Therefore, many business-to-drive components of the warranty time is far shorter than the other parts. In fact, affect the life of the main drive is the laser head, laser head is actually the life of drive life. To extend the drive life, it should start batteryfrom the laser head of maintenance, specifically the following 10 law:
First, to keep CD-ROM, CD-ROM cleaning
CD-ROM uses a very precise optical components, and optical components are most afraid of is the dust pollution. The dust from the CD-ROM into, out of the whole process, the cleanliness of the CD-ROM disc is also directly related to the life. Therefore, the CD-ROM in the drive before loading the necessary cleaning of the CD-ROM does not use proper care to prevent dust pollution.
Second, regular cleaning and maintenance of laser head
CD-ROM used for a period 4834T of time, the laser head is bound to infected dust, so that a reduced ability to read the disk drive. Concrete expression to slow down to read the disk, display pictures and sound in mosaic or pauses, and in severe cases can be heard frequently drive to read CD-ROM's voice. Of these phenomena on the laser head and drive battery motor and other components are damaged. Therefore, the user should be cleaned regularly drive maintenance or for a professional maintenance.
Third, to maintain the horizontal drive
In the machine using the process, the drive to maintain the level place. The reason is that the disc is in rotation due to imbalance in the center of gravity changes, a slight decline in the ability to read the disk when you can, in severe cases can damage laser head. Some people use a computer CD-ROM in a different machine to install software, and often removed the drive brought take that, or even carry, which is F4098A very damaging to the CD-ROM. , The harm is within the CD-ROM optical components, laser head due to vibration and tilt changes in place, resulting in optical performance.
4, to develop a set off the habit of taking time before the
Once inside the CD-ROM drive, not only battery when the computer starts to read the disk to have a very long time, and has been in a CD-ROM will also be high-speed rotation state. In this way, an increase of the laser head of the working hours, also within the drive motor and transmission components in a worn state, virtually shorten drive life. Recommend that users want to develop a good time before the shutdown remove from the CD-ROM CD-ROM habits.
5, reducing the working hours of CD-ROM
In order to reduce the use of F4809A drive time to extend its life, the use of the computer users in the case of hard drive space allows, you can put frequently used discs made of a virtual CD-ROM stored on your hard disk. Such as educational software, games, software, etc. stored in the hard disk, so that later can be run directly on the hard disk, and have battery fast speed.
6, with less use of pirated optical discs, CD-ROM multi-purpose genuine
Many of my friends because of the price of pirated optical discs with a certain gap between the price of genuine CDs, plus CD-ROM is rich in content to buy to use, based on China's national conditions, this is beyond reproach, but because of your long-term reading of pirated optical discs, because of its poor quality disc , the laser head need to repeatedly read the data. This increase in motor and laser heads working hours, thus greatly reducing the service life of drive. Currently the price of genuine software has been greatly decreased, and some only slightly more expensive than the pirated F4812A software, and CD-ROM drive access assured. It is proposed that we minimize the use of pirated optical discs in the future more battery than the use of legitimate discs.
7, the correct opening and closing plate box
Either way, drive, front panel has a box and closed box button, use this button switches of conventional CD-ROM disk box right approach. Button when the finger can not be too much force to prevent the keys out of control. Some users used their hands to push back the direct disc box, which drives the drive gear is a kind of damage, it is recommended the user to overcome this bad habit.
8, using procedures of opening and closing plate box
The use of procedures 319411-001 switchboard boxes, and in many multi-media player software or tools have this function. If the windows using the battery mouse right-click the CD-ROM drive letter, its pop-up menu also has a "pop-up" command, you can eject the disc box. Users are advised to make full use of software-controlled opening and closing disc box, this would reduce the incidence of drive failure.
9, careful maintenance of
As the CD-ROM of all the parts are very sophisticated, users open the drive and installation process must pay attention to ways and means, pay attention to records of the original fixed position. If you are not sure if the professional maintenance personnel could be invited to disassembly and maintenance. In particular the aging of laser head, need to adjust the drive power to increase the power of laser tube, be sure to ask the professional maintenance staff debugging, to prevent their own adjustments too large, making laser head burned.
10, as little as possible DVD release
This avoids drive to work long hours due to a long continuous drive read the disk, a battery great impact on the drive life. Users will need to regularly Presario 2100(compaq 2100) laptop battery broadcast programs, better be copyed into the hard disk to ensure that the drive longevity. If you do often depends on DVD, it is recommended to buy a cheap low-speed drive designed to play vcd.
No comments:
Post a Comment